Printed parts

Just here for the prints? Every 3D-printable part from our builds, linked to the creator's files, plus standalone print-ready models.

Hackberry Pi CM5 by ZitaoTech

• Middle section, display support and keyboard-specific shell parts — STL and STEP files are in the repository's 3D-Modell directory; repository license is MIT.

Recovery Kit (Pelican case deck) by Jay Doscher

• Lid screen bezel — Original used custom panels; verify source and license
• Base deck plate — Verify

ClockworkPi uConsole by ClockworkPi

• Community mod parts (stands, covers) — Many on Printables; check each license

Hyper-pi by Rop Gonggrijp

• Top half, bottom half and microSD-card extender — STL and FreeCAD files are in the repository's case/CAD directory; repository license is MIT.

Little Luggable by Jason Morley

• Compute fascia and mounting plate — DXF files are in manufacture/; repository license is CC BY 4.0. The fascia is 3mm acrylic and mounting plate is 1mm aluminium.
• Keyboard fascia, mounting plate, PCB and mounting brackets — DXF, KiCad and STL sources are published; repository license is CC BY 4.0.

Penkesu Computer by Penk Chen

• Penkesu clamshell enclosure set — Six STL files plus a STEP assembly are in the official repository; repository license is MIT.

PiMech Deck by Rich / Brickbots

• PiMech segmented enclosure and display hinge set — Official case directory contains the STL parts and plate DXF. Repository license is CC BY-NC-SA 4.0: attribution, noncommercial use and share-alike terms apply; prints may not be sold under this license.

Stardeck Raspberry Pi Cyberdeck by YodaheWondimu

• Stardeck enclosure STL set — Five STL files are linked in the repository hardware/stl directory. No project license is declared; link only and obtain permission before redistribution or commercial printing.

Tinycorder Environmental Data Logger by Egokitek

• Tinycorder enclosure STL set — Four STL files are linked in the repository STL directory. Repository metadata declares GPL-3.0, but no separate hardware/model license notice was found; review scope before redistribution or commercial printing.

Bumble Berry Pi by Sam Cervantes

• Bumble Berry Pi enclosure A and B, version 3 — Official STL and editable u3d files are in the repository; GPL-3.0 applies.

DC34 A7S Cyberdeck by skitz0

• DC34 A7S Cyberdeck eight-part chassis — Official STL files for the controls, connector support, CPU chassis, deck chassis, faceplate, joystick, internal support and top. Hardware files are CERN-OHL-P-2.0 licensed; retain the notices when redistributing.

RadioDeck GQRX Hardware Console by vitasam

• RadioDeck front, back and stand — Official STL files; credited to Akseli Nikkanen and licensed CC BY-NC 4.0. Noncommercial restriction applies.
• Knurled rotary-encoder knob — Official repository copy of tsw’s model, licensed CC BY 4.0; retain attribution.

Chonky Palmtop by a8ksh4

• Chonky Palmtop enclosure and folding-keyboard mechanism — Fourteen official STL files are linked in the repository. The README says “Creative Commons Share Alike” but gives no version or complete license identifier; confirm terms with the creator before redistribution or commercial printing.

Modem Thing by bkovac

• Modem Thing enclosure — Official STEP enclosure files are in the repository; licensed CERN-OHL-P-2.0.

FrameDeck by Richard Sutherland / Brickbots

• Framework mainboard mounting adapters — Official printed_parts/mainboard_mount.3mf; print two adapters per mounting screw. Material and screw count are unspecified, and the repository does not map a license to this individual asset.
• Right-angle cable enclosure/guide — Official printed_parts/ra_cable_guide.3mf; mirror it for the second half and trim to length. Asset-specific license is not mapped.
• Layered acrylic enclosure — Fourteen official DXFs produce the documented 16 physical layers. This is laser-cut, not 3D-printed; asset-specific license is not mapped.

Rasti Computer by Penk Chen

• Rasti Computer enclosure set — Eleven FDM STLs plus an editable STEP file are in the official case directory; MIT license.
• Rasti64 keycap sets — Print five 1U sets and two mixed-size sets in SLA resin; official STL files are MIT-licensed.

Typeframe PX-88 by Jeff Merrick

• PX-88 printed enclosure, keyboard shell and hinge set — Official repository provides tight-tolerance 3MF/STL sets, loose-tolerance STL sets and Fusion/STEP sources. Hardware and print files are CC BY-NC-SA 4.0: attribution, noncommercial use and share-alike terms apply; prints may not be sold under this license.

HandiPi by brickbots

• Main case components — Four creator-published 3MF case sections (bottom, middle, keyboard bezel and screen bezel). License: MIT. Source: https://github.com/brickbots/HandiPi/tree/main/printed_case

Paper Pi Handheld by a8ksh4

• Custom handheld enclosure — The README links the public Onshape model but states no license. Do not redistribute or sell the design without permission.

vecdec 1.1 by svenscore

• vecdec 1.1 enclosure, keyboard trays and case sleeve — Official version 1.1 STL files are provided for a 250×210mm print bed. The project is CC BY-NC-SA 4.0: attribution, noncommercial use and share-alike terms apply; prints may not be sold under this license.

ittyPDA by ingobeans

• Case shell — Printable STL, STEP and Blender files are in case/. The repository declares no license, so the files are indexed as unlicensed: do not redistribute or sell prints without the creator’s permission.

Hackberry Pi Zero by ZitaoTech

• Hackberry Pi Zero keyboard, rear, middle and button models — Official 3D-Modell directory provides STL files; repository is MIT licensed.

Lambda Cyberdeck 910 by Cody Tolene

• Lambda Cyberdeck 910 case insert, panels and keyboard tray — Official STL and 3MF assemblies are linked from the creator repository. The repository applies CC BY-NC 4.0: attribution is required and prints may not be sold under this license.

QAZ Cyberdeck by Gisbi (g1sbi), based on whydobearsxplod’s design

• QAZ Cyberdeck case and back panel — Official Case.stl and Back.stl are in the creator repository. The repository declares GPL-3.0; preserve the license and corresponding-source obligations when redistributing modified files.

Cyberdeck PICO8 by Victor Barahona (Egokitek)

• Base, lid, screen bezel and screen stop — Official four-file STL set in the repository. The project is licensed GPL-3.0.

ESP32-S3 RLCD cYbErDeCk by Kyle Smith

• Chassis, back plate, button sprue and optional magnetic cover — Official print-ready STL set in the repository. The project is licensed MIT; the creator states that no part has yet been physically printed or fitted.

Framework Cyberdeck by Ben Makes Everything

• Framework Cyberdeck printed frame, display frame and buttons — README lists four frame sections, two screen-frame sections and two printed buttons at 50% infill. The repository publishes STL/STEP/Fusion files but declares no license; obtain permission before redistribution.
• Framework Cyberdeck top and bottom plates — Creator publishes 2D/3D plate files and recommends laser-cut acrylic or machined aluminum because the plates are large and PLA is unsuitable. License is not stated.

RP2040 CyberDeck by Juan R. Ortiz

• RP2040 CyberDeck enclosure, cover, buttons and macro keycaps — Official CAD directory contains enclosure, cover, button and keycap STLs plus 3MF and FreeCAD sources. Repository declares no license; obtain permission before redistribution.

Standalone print-ready models

Mounts, bezels and cases matched to parts. See all models with finishing and license details.

• Hackberry Pi CM5 shell set MIT
• Hyper-pi enclosure MIT
• Generic Pi 4/5 VESA-style mount plate varies
• 7-inch HDMI screen bezel varies
• Little Luggable fabrication files CC BY 4.0
• Penkesu clamshell enclosure MIT
• PiMech Deck enclosure set CC BY-NC-SA 4.0
• Bumble Berry Pi enclosure GPL-3.0
• DC34 A7S Cyberdeck chassis set CERN-OHL-P-2.0
• RadioDeck console enclosure and knob CC BY-NC 4.0 enclosure; CC BY 4.0 knob
• Modem Thing enclosure body and cover CERN-OHL-P-2.0
• FrameDeck Framework mainboard mounting adapters unverified
• FrameDeck right-angle cable enclosure unverified
• Rasti Computer enclosure and keycap set MIT
• HandiPi four-part enclosure MIT
• Chonky Palmtop enclosure and keyboard STL set CC BY-SA 4.0
• CyberKeeb 2040 laser-cut acrylic frame CC BY-SA 4.0
• Modem Thing enclosure CERN-OHL-P-2.0
• Tinycorder top and bottom case GPL-3.0
• Chonky Palmtop enclosure and mechanisms CC ShareAlike (version unspecified)
• Bumble Berry Pi enclosure part A GPL-3.0
• Bumble Berry Pi enclosure part B GPL-3.0
• Lambda Cyberdeck 910 printable assembly CC BY-NC 4.0
• QAZ Cyberdeck enclosure GPL-3.0
• Cyberdeck PICO8 enclosure set GPL-3.0
• ESP32-S3 RLCD cYbErDeCk print-ready enclosure MIT