Cyberdeck PICO8

by Victor Barahona (Egokitek) · Hard · manifest draft — being verified

A compact Raspberry Pi 3 clamshell built around a 3.5-inch resistive display, thumb keyboard and printable shell.

Egokitek designed Cyberdeck PICO8 as a small self-contained Pi terminal with its battery, charging and 5V boost electronics packed behind a tilting display. The repository documents wiring and assembly in photographs and publishes the enclosure as four printable pieces.

Original: github.com, github.com, github.com, github.com

Printable files

File links are being added. Check the original source above in the meantime.

Jump to the parts list ↓ · License tags say whether you may sell prints (NC = non-commercial).

Parts

QtyPartPriceBuy
1×Raspberry Pi 3 (revision unspecified)
Repository README and BOM: Raspberry Pi 3; exact Model B revision is not stated.
—Search PiShop.us Search Amazon
1×3.5-inch resistive TFT display (model unspecified)
Repository README: 3.5-inch resistive TFT matching the Pi footprint; BOM adds no model, resolution or interface.
—Search Waveshare Search Amazon
1×Mini Bluetooth QWERTY keyboard
Repository README and BOM: very small Bluetooth keyboard; manufacturer and model are not stated.
—The Pi Hut Search Amazon
1×TP4056 USB single-cell Li-ion charger module
Repository README and BOM: USB battery charger based on TP4056; connector and protection-board revision are not stated.
—Search DigiKey Search Amazon
1×Adjustable MT3608 DC-DC boost converter module
Repository BOM names MT3608; README describes a DC-DC step-up from 3.7V to 5V.
—DigiKey Search Amazon
1×3.7V Li-ion battery for Cyberdeck PICO8
Source conflict: BOM says 3000mAh, while README says 3300mAh. Dimensions, connector and manufacturer are not stated.
—Search Adafruit Search DigiKey Search Amazon
1×Subminiature toggle switch
Repository BOM names a toggle switch; README describes a side power button. Electrical rating and dimensions are not stated.
—Search DigiKey
2×M3×25mm machine screw
Repository README: two M3×25 screws join the two main PLA chassis pieces; head style and mating hardware are not stated.
—Search DigiKey Search Amazon
1×PLA filament 1.75mm
Repository README says the two-piece chassis is printed in PLA; color and quantity are not stated.
—Search Micro Center
Parts cost estimate coming soon: prices are being checked at reputable sellers.

Notes

README, assembly guide, BOM spreadsheet, STL index and GPL-3.0 license checked at source commit 9c581304a084f04e8c7560e5fb4c2a661adfbef2 on 2026-10-27. Kept draft because the Pi 3 revision, display model/interface, keyboard model, battery dimensions/connector, switch ratings and screw head style are not specified, and the README says 3300mAh while the BOM says 3000mAh.

The BuildDeck dispatch

A weekly email of new build manifests and parts deals is coming soon.